1

LIST OF EQUIPMENT

1. Pulp Preparation System – 1 Set

2. Service system – 1 set.

3. Reciprocating Moulding Machine with 4 Nos. suction moulds and 4 Nos. transfer moulds -1 No.

4. On-line Conveyorised Drier – 1 No

5. Tray Compacting machine – 1 No

6. Gas Heating system without Gas Burner – 1 No.

2

AREA REQUIRED (APPROX)

300 Sq.Mtrs
Recommended size of factory shed : 25 mtrs length x 12 mtrs width x 5.0 mtrs height

3

RAW MATERIAL (WASTE PAPER) INPUT(APPROX)

100 Kgs/hour

4

WATER REQUIREMENT (APPROX)

400 Litres / hour

5

CHEMICALS LIKE WAX ETC (APPROX)

2 Kgs/hour

6

FUEL USED
(Note : There will be some differences at the site depending on the products made and local working conditions)

Diesel
(9000 k.cals/litre) : 29 litres / hour (approx.)

Natural Gas
(9500 k.cals/cubic metre) : 27 cubic metres / hour (approx.)

LPG (Liquified Petroleum gas)
11,500 k.cals / kg : 22 kgs / hour (approx.)
5,900 k.cals / litre : 43 litres / hour (approx.)

7

INSTALLED POWER(APPROX)

a) Production Line : 115 HP (87 KW)
b) Air Compressor : ...20 HP (15 KW)
(Customer scope) -------------------------
Total :..... ........... : 135 HP (102 KW)

Three Phase , 380-440 V , AC 50/60 HZ

8

DIRECT LABOUR

3 Persons/shift

1

LIST OF EQUIPMENT

1. Pulp Preparation System – 1 Set

2. Service system - 1 set.

3. Multi-Side Rotary Moulding Machine with 16 suction moulds and 4 transfer moulds – 1 No.

4. On-line Conveyorised Drier– 1 No

5. Tray Compacting machine – 2 Nos

6. Gas Heating system without Gas Burner -1 No

2

AREA REQUIRED (APPROX)

800 Sq.Mtrs (Length not less than 40 metres)
Recommended size of factory shed : 40 mtrs length x 20 mtrs width x 5.5 mtrs height

3

RAW MATERIAL (WASTE PAPER) INPUT(APPROX)

200 Kgs/hour

4

WATER REQUIREMENT (APPROX)

800 Litres / hour

5

CHEMICALS LIKE WAX ETC (APPROX)

2 Kgs/hour

6

FUEL USED
(Note : There will be some differences at the site depending on the products made and local working conditions)

Diesel
(9000 k.cals/litre) : 67 litres / hour (approx.)

Natural Gas
(9500 k.cals/cubic metre) : 62 cubic metres / hour (approx.)

LPG (Liquified Petroleum gas)
11,500 k.cals / kg : 51 kgs / hour (approx.)
5,900 k.cals / litre : 100 litres / hour (approx.)

7

INSTALLED POWER(APPROX)

a) Production Line: 180 HP (135 KW)
b) Air Compressor : ..25 HP (18.75 KW)
(Customer scope) ------------------------------
Total ....... ......... : 205 HP(153.75KW)

Three Phase, 380-440 V, AC 50/60 HZ

8

DIRECT LABOUR

3 Persons/shift

1

LIST OF EQUIPMENT

1.Pulp Preparation System – 1 Set

2.Service system – 1 set.

3. Multi-Side Rotary Moulding Machine with servo Drive with 20 suction moulds and 5 transfer moulds – 1 No. (Maximum product size : within 295 mm x 295 mm)

4. On-line Conveyorised Drier– 1 No

5. Gas Heating system without Gas Burner -1 No

2

AREA REQUIRED (APPROX)

900 Sq.Mtrs
(Length not less than 60 metres) Recommended size of factory shed : 60 mtrs length x 15 mtrs width x 5.5 mtrs height

3

RAW MATERIAL (WASTE PAPER) INPUT(APPROX)

300 Kgs/hour

4

WATER REQUIREMENT (APPROX)

1000 Litres / hour

5

CHEMICALS LIKE WAX ETC (APPROX)

3 Kgs/hour

6

FUEL USED
(Note : There will be some differences at the site depending on the products made and local working conditions)

Diesel
(9000 k.cals/litre) : 112 litres / hour (approx.)

Natural Gas
(9500 k.cals/cubic metre) : 105 cubic metres / hour (approx.)

LPG (Liquified Petroleum gas)
11,500 k.cals / kg : 87 kgs / hour (approx.)
5,900 k.cals / litre : 170 litres / hour (approx.)

7

INSTALLED POWER(APPROX)

a) Production Line: 244.50 HP (182.5 KW)
b) Air Compressor : ..30 .....HP ( 22 KW)
(Customer scope) -----------------------------------
Total................ . : 274.50 HP (204.5 KW)

Three Phase , 380-440 V , AC 50/60 HZ

8

DIRECT LABOUR

3 Persons/shift